Addonics-technologies AD2SAHDCF Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Hardware Addonics-technologies AD2SAHDCF. Addonics Technologies AD2SAHDCF User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 4
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
Addonics
T E C H N O L O G I E S
Dual CF-SATA HDD Adapter
Model: AD2SAHDCF
User’s Guide
Version 1.0
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a class B digital
device pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause harmful interfer ence to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on and off, the user
is encouraged to try and correct the interference by one or more of the following
suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to a different power outlet other than the one where receiver is
connected
Consult a certified television or radio technician
Overview
Note: The default setting for the RAID setting is
BIG. The switch has 3 settings. You slide the switch
from left to right to change RAID setting.
SATA Power
Connector
2.5” form
factor bracket
CF Slot 2
CF Slot 1
USB Port
SATA Data
Connector
Switch
Vista de página 0
1 2 3 4

Resumo do Conteúdo

Página 1 - Addonics

Addonics T E C H N O L O G I E S Dual CF-SATA HDD Adapter Model: AD2SAHDCF User’s Guide Version 1.0 FCC Warning Statement Thi

Página 2 - RAID Settings

Recommendations on using the AD2SAHDCF as a boot device The CF cards plug into the AD2SAHDCF can be configured as your boot drive. It is recommended

Página 3

Steps to configure a SAFE RAID set using USB connection (Windows XP) 1. Open the 57xx SteelVine Manager. 2. Insert the 2 CF cards to the CF slots

Página 4 - RAID Setting

8. To rebuild the SAFE RAID set, go to Action > Start Rebuild > Drive 1 Once Rebuild is done, this is the result. Note: The steps for cr

Comentários a estes Manuais

Sem comentários